Customize Size Suspension Arm Systems For Waterproof Electrical Box

Customize Size Suspension Arm Systems For Waterproof Electrical Box

Operator Interface Enclosures​ Descriptions:

The control box bracket consists of a high quality anodized aluminum profile and an aluminum die cast component. The design is simple and the structure is light and stable. The surface of the column is anodized and integrated with the control box. The backward convex angle of the forward convex curvature design is more ergonomic. The chassis part adopts the surface dark gray spray process, which meets the needs of industrial occasions.

The bracket can be used with various series and other types of control cabinets. Chassis casters or support feet are optional and can be ordered separately.

Basic performance and parameters
Dimensions (excluding casters or support feet):
Height × width × depth: 1018mm × 600mm × 650mm

Cantilever Control Box's material:
Column profile: aluminum alloy 6063
Both ends of the column: die-cast aluminum alloy 102
Chassis frame profiles: aluminum alloy 6063
Chassis corner parts: die-cast aluminum alloy 102
Beads on both sides of the chassis: PE

colour:
Column: anodized aluminum or sprayed rock gray
Both ends of the column: spray, rock ash, similar to RAL7012
Chassis frame: spray, rock ash, approximate RA; 7012

Installation methods:

1. The back (a direction) outlet below the column, and the hose connector is installed in the cover.

2. The Bottom middle (B-direction) outlet, open 90-degree hose on the cover plate (requires fitted with casters or support feet)